I need to run my cable through some PVC tomorrow, and get all the cables tied down. I highly doubt my angle is correct, problem for future me (mounting brackets are adjustable).

Inside the shed i have a Jackery 2000 v2. I have all of my cordless tool batteries out there to charge. I also have an LED shop light, and a charging station for the wife, and my escooters.

  • WhiteOakBayou@lemmy.world
    1·
    1 month ago

    Nice panel stand! If it was me I’d cross brace the arms and use ground anchors to guy it out but eight screws and some glue keep my panels on my camper roof at highway speeds so maybe I’m overthinking it.

  • Creat@discuss.tchncs.de
    0·
    1 month ago

    You sure that’s anchored down properly? If a strong wind from the right direction pulls on that, are the panels gonna stay put? I mean all the connectiona in between the panels and the ground. Is just a single picture, kinda hard to tell how it’s constructed. But panels going flying in a storm isn’t exactly a fun time…

    • zr0@lemmy.dbzer0.comEnglish
      1·
      1 month ago

      I had the same thought. No real wooden joints, just pure screws and some prayers. This will probably not withstand winds above 80km/h